WorkNC G3 brings easy management of toolpaths display directly within the WorkZone Manager, including :

Icon based display options for the active toolpath – a simple click allows you to show or hide toolpaths and toolpath options (view, rapids, etc) 

A different display mode can be used for each element independently of each other.

-Clear CAM display.

-Simple direct click display options.

-Multi display modes for tools, holders and machines (wireframe, solid, transparent).

The WorkNC G3  Simulation display has been completely revised and optimized.

It allows direct picking on the toolpath for automatically positioning the tool and display point information.

- Single easy to use dialog box,

- Simulation in real machining time  or  point to point (V18),

- Exact toolpath positioning,

- Progressive toolpath display.

- Simulation on stock.

The WorkNC G3 integrated interface allows you to directly create new geometry in the same environment.

A simple click on the CAD mode activates tool bars giving direct access to main CAD functions.

Advanced modeling functions previously available in WorkNC-CAD can now be used to create new geometry directly on your CAM model (hole patching ...).

-3D surface modeling on CAM geometry.

-Specific CAD toolbars for adding or repairing CAM geometry.

-Advanced modeling functions from WorkNC-CAD.

'Analysis' takes on a new meaning in this integrated environment as the part to be machined can be analyzed directly and with extreme precision.

 Analysis direct on CAM geometries :

- Visualize cross-sections,

- Radii to determine the smallest diameter cutter required,

- Check the heights to determine the minimun cutter lengths,

- Draft angle detection allows undercuts to be  displayed ...

- Integrated Analysis tool: Cross section on CAM parts.