| U.S.Training |  |
All classes are from 8.00 a.m. - 4.00 p.m and are held at : Sescoi Inc., 2000 Town Center, Suite 1730, Southfield, Michigan, 48075 unless otherwise noted.
Tel : 248 351 9300 Fax : 248 351 9301
-Refreshments will be provided by Sescoi
-Training costs are per student, per day (costs are in U.S. funds).
-Payment by check or credit card required prior to attending training.
-Two weeks notice required to reschedule a class to a future date, under two weeks may incur a 15% service charge. No same day cancellations.
This is the first class to take for learning WorkNC. It allows those unfamiliar with WorkNC to gain an understanding of the user interface and how to cut parts.
Content: Introduction to WorkNC – Getting started with WorkNC – WorkNC License server – Defining a machining strategy – Visualizing and editing toolpaths with VisuNC – Post Processing the toolpaths – Batch Processing – Open Forum
Price: $425
Duration: 1 day
Promotion: Take Basic I and Basic II together for only $750
Dates :
12/12/2011
01/10/2012
02/14/2012
03/13/2012
04/16/2012
05/09/2012
06/04/2012
This class builds on the Basic I class. It goes deeper into the WorkNC interface, and covers new, slightly more advanced topics. After Basic I and Basic II, users should have baseline proficiency with WorkNC and how to make cutterpaths.
Content: WorkNC menu functions – Machining sequences – Axis systems – Boundary curve creation – VisuNC display options – IGES – WorkNC translation of curves, points and surfaces – Open Forum
Price: $425
Duration: 1 day
Promotion: Take Basic I and Basic II together for only $750
Dates :
12/13/2011
01/11/2012
02/15/2012
03/14/2012
04/17/2012
05/10/2012
06/05/2012
This class is often taken one or two months after Basic I and Basic II, once the WorkNC user has gained some proficiency, and come up with some questions. This class covers topics that can improve cutterpath generation and the milling process.
Content: WorkNC menu functions – Machining sequences – WorkNC status symbols – Merged Surfaces – Masking data – Stock Model – VisuNC toolpath editing – Machining Window, View, boundary and plane – Batch Mode calculation – setting up default parameters – VisuNC shortcuts/display options – Machining with Rotary heads and tables – Holder Library – Tool Holder Collision checking – Surface Lists – Open Forum.
Price: $450
Duration: 1 day
Promotion: Take Advanced I and Advanced II together for only $800
Dates :
12/14/2011
01/17/2012
02/21/2012
03/19/2012
04/23/2012
05/15/2012
06/19/2012
Similar to Advanced I, this class covers some advanced topics for the experienced WorkNC user. Many of the routines shown are specialized tactics for special circumstances.
Content: WorkNC High Speed Machining for roughing and finishing – High Volume Roughing – Tool Library – Rest Material Functions – using alternate axis systems – Curve Machining cutterpaths, Tangent to curve, Curve re-machining, on curve engraving, pocketing, drilling, hole boring, tapping – Machining STL data – Internal scaling factor – advanced post processor options – open forum
Price: $450
Duration: 1 day
Promotion: Take Advanced I and Advanced II together for only $800
Dates :
12/15/2011
01/18/2012
02/22/2012
03/20/2012
04/24/2012
05/16/2012
06/20/2012
This class if for the person already familiar and trained to run WorkNC on 3-Axis cutterpaths. It covers the 4 and 5 axis cutterpaths, and special tips to make them work better.
Content: 5-axis toolpaths – 5 axis VisuNC – 5-Axis toolpath editor – 5-axis collision checking – virtual machine simulation for 3 axis, 3+2 axis and 5 axis – detection of collisions and limits for varying machine configurations in addition to the tool and tool holder – Auto5 module for deep parts. Students are encouraged to bring their own parts and machine design for their own use and customization. Open Forum
Price: $500
Duration: 1 day
Dates :
12/16/2011
01/19/2012
02/23/2012
03/21/2012
04/26/2012
05/08/2012
06/21/2012
This class is for the person that wishes to use CAD functions to modify or fix their CAD model prior to making cutterpaths. It is also useful for WorkNC users that need advanced functionality such as Electrode Extraction, Core CAvity seperation or to relieve inside radii on dies. This class covers 3D geometry creation, but not dimensioning or drafting.
Content: Viewing files – dynamic pan, rotate and zoom – Zoom Window – OpenGL analysis, curvature, draft, sections, elevation and planar/vertical areas – Workplane grid – object snaps – Wireframe creation – Lines by: 2 points, continuous, rectangular, polygon, start angle end, tangent two arcs, perpendicular, continue tangent – Points input – Circles and Arcs, center and radius, 2 points, 3 points tangent, close arc, continue tangential, arc center start end, arc 2 points, arc 3 points, semi circle – Spline curves, open and closed, through points or control points, blend spline, rib curve – Wireframe editing, extend trim curves, extend trim corner, clean curve, smash curve, merge curves, break curves, lengthen, project to surface – Surface Creation, Planar, irregular planar, linear sweep, surface from part line, Tangent plus length, angle plus length, ruled, coons, lofted, blend surface, extrude along path, extrude cross section, sweep, N-sided blend, complementary surface, fill surface, drafted surface – Surface edition, trim to cutter, untrim, trim to surfaces, extend surfaces – Transformations, move, scale, rotate, mirror geometry with and without copies – Mold Functions, core cavity separation, electrode creation, pocket, inserted element, section cuts, part line – Derived elements, offset curves, offset surfaces, fillets, exploding surface edges, exploding text – Connecting to WorkNC, create workzone, add geometry to zone, coordinate systems – Die Functions, sorting fillets, adjusting fillets – Open Forum
Price: $850
Duration: 2 day(s)
Dates :
01/24 - 01/25 2012
02/28 - 02/29 2012
03/27 - 03/28 2012
04/18 - 04/19 2012
05/22 - 05/23 2012
06/06 - 06/07 2012
This class covers everything in the WorkNC-CAD for Machinists, but also adds drafting, drawing and other 2D specific functions necessary for people still making prints or 2D drawings.
Content: Viewing files – dynamic pan, rotate and zoom – Zoom Window – OpenGL analysis, curvature, draft, sections, elevation and planar/vertical areas – Workplane grid – object snaps – Wireframe creation – Lines by: 2 points, continuous, rectangular, polygon, start angle end, tangent two arcs, perpendicular, continue tangent – Points input – Circles and Arcs, center and radius, 2 points, 3 points tangent, close arc, continue tangential, arc center start end, arc 2 points, arc 3 points, semi circle – Spline curves, open and closed, through points or control points, blend spline, rib curve – Wireframe editing, extend trim curves, extend trim corner, clean curve, smash curve, merge curves, break curves, lengthen, project to surface – Surface Creation, Planar, irregular planar, linear sweep, surface from part line, Tangent plus length, angle plus length, ruled, coons, lofted, blend surface, extrude along path, extrude cross section, sweep, N-sided blend, complementary surface, fill surface, drafted surface – Surface edition, trim to cutter, untrim, trim to surfaces, extend surfaces – Transformations, move, scale, rotate, mirror geometry with and without copies – Mold Functions, core cavity separation, electrode creation, pocket, inserted element, section cuts, part line – Derived elements, offset curves, offset surfaces, fillets, exploding surface edges, exploding text – Connecting to WorkNC, create workzone, add geometry to zone, coordinate systems – Die Functions, sorting fillets, adjusting fillets,..
Price: $975
Duration: 3 day(s)
Dates :
01/24 - 01/26 2012
03/27 - 03/29 2012
05/22 - 05/24 2012
Content:
Classroom training of how to run feature recognition. This class will also examine setting up template files and tool libraries for feature milling. Lastly, it will cover some options specific to post processors when using feature recognition. It is recommended people bring to this class a tool list of tools and common features to program and take back with them.
Price: $450
Duration: 1 day
Dates:
01/12/2012
02/16/2012
03/22/2012
04/25/2012
05/17/2012
Click here to download a pdf file of the latest Sescoi US training schedule
|
(+1)-248-351-9300
ι Privacy policy ι Technical support portal ι Partners portal ι Links List ι Articles List ι Country/Language ι Site map ι Webmaster 
